Posted by admin | Posted in Home Improvement | Posted on 26-12-2009
Tags: floor, flush mount wood floor vents, register, unfinished wood floor vents, vent, vents, wood, wood floor vent covers, wood floor vents
With more Chicago condo and home owners deciding to remodel and upgrade their current residences instead of buying a new house or condo, one of the projects that many decide to tackle is refinishing hardwood floors. Not only will refinishing your hardwood floors give your home a great new look, it will add value if you ever decide to sell. Hardwood floors that have a beautiful finish are one of the top selling points that many prospective buyers look for when shopping for a new condo.
Refinishing your hardwood floors isn’t as complicated as you might think, although it can be time consuming and a little labor intensive. There are a few tools and supplies you will need though. Nearly all can be rented if you don’t want to lay out the money to buy them or think you won’t have a need for them in the future.
The basic tools you will need are some kind of sander, which we’ll cover in the next section, safety glasses, dust mask or respirator, ear plugs, sand paper, masking tape, drop cloths or plastic sheeting, stain and plenty of rags or tack cloths.
Before you begin sanding, you need to determine the thickness of your wood flooring. It needs to be at least 3/4 inch thick before sanding, otherwise you risk sanding too deeply and damaging the floor. Older wood flooring is normally fairly thick, but some of the newer engineered wood floor material can be thinner, so check before you start to sand.
Start by emptying the room of all furniture and sweeping your floor to remove any debris that might cause scratches while sanding. Since there will be a good deal of dust generated from the sanding process it may be wise to also take down any window coverings, pictures on the walls, cover ceiling lights and also put a plastic sheet barrier over any doorways to other rooms to prevent dust drifting. You should also tape off heating and cooling vents and electrical outlets. The trim along the edge of the floor should also be carefully removed and sanded by hand. If you can open some windows and even place a fan to draw out the dust it would help a lot.
You can rent a drum sander at most hardware stores. This tool takes some getting used to if you’ve never used one before, so it’s wise to practice a little in a part of the room that won’t be seen as easily until you get the hang of it. Always tip the drum sander up before you turn it on. Never start it while it is still flat on the floor. Gradually lower it and then move it back and forth or from side to side, never let it sit still or it will sand out a deep pocket and you’ll ruin your floor. Keep moving until you’ve covered the entire surface.
If your floor has a lot of scratches or needs a lot of sanding, begin with about 20 grit sandpaper. The lower the grit number, the coarser the grit and the higher the number, the finer the grit. So you should progress from low to high, and usually finish with about 120 grit. It’s best to save the edges for last and do them by hand. Once you are finished sanding, vacuum thoroughly and it’s also a good idea to wipe the floor down with a tack cloth to be sure you get all the dust up
Now you are ready to actually stain your hardwood floor. Depending on what type of water-based or oil-based stain you decided upon, you may have to apply more than one coat and do a light sanding between coats. Be sure to read the instructions on the product before starting. And remember that the color on the can label or in the store won’t be the exact color of your floor, so try out a small patch in an area that isn’t easily visible to make sure you are satisfied with the color. Be sure to have plenty of ventilation while staining as the fumes can be strong.
Once you have all the coats applied and the floor is completely dry, you should probably rent a buffer to really give the stain job a great finish. Just like the drum sander, start slow until you get the hang of using the tool. The final step then is to reattach any molding or trim you removed (after staining it of course) and apply a polyurethane finish. You may have to give the floor more than one coat with drying time between. You can do this by hand with rags, but using a tool with a long handle similar to a sponge mop will save both your back and time. Read the label for recommended drying time, but it’s always a good idea to wait an extra day or two especially in high humidity before moving the furniture and any rugs back into the room.
Refinishing your hardwood floors will add beauty and value to your condo or house. Most Chicago real estate agents have noted that units with hardwood floors like the ones listed in these new construction condos http://www.bestchicagocondos.com/new-construction-condos/index.html sell better than homes without hardwood floors. This not only is a great selling point that many buyers look for, but something you can enjoy yourself for years to come.
About the Author:
Paula Cherrist writes articles about
Chicago real estate
, Chicago condos for sale, housing-related topics and home trends.
Article Source: ArticlesBase.com – Tips For Refinishing Hardwood Floors
|
|
4″x12″ RED BIRCH FLUSH MOUNT WOOD FLOOR VENT REGISTERS $20.99 |
|
|
8″x14″ RED OAK FLUSH MOUNT AIR RETURN WOOD FLOOR VENTS $26.99 |
|
|
8″x14″ WHITE OAK SELF RIM AIR RETURN WOOD FLOOR VENTS $24.99 |
|
|
5 pcs.Flush Mount Wood Floor Air Vent Register Unf. $59.99 |
|
|
4 x 14 Red Oak Flush Wood Floor Vent Register Unfin. $15.99 |
|
|
2 1/4 x 10 Red Oak Flush Wood Floor Vent Register Unf. $12.99 |
|
|
2 1/4 x 12 Red Oak Flush Wood Floor Vent Register Unf. $12.99 |
|
|
2 1/4 x 14 Red Oak Flush Wood Floor Vent Register Unf. $14.99 |
|
|
8″x12″ WHITE OAK DROP IN AIR RETURN WOOD FLOOR VENTS $23.99 |
|
|
2″x12″ RED BIRCH FLUSH MOUNT WOOD FLOOR VENTS REGISTER $17.99 |
|
|
4″x12″ RED BIRCH FLUSH MOUNT WOOD FLOOR VENT REGISTERS $20.99 |
|
|
8″x14″ WHITE OAK SELF RIM AIR RETURN WOOD FLOOR VENTS $24.99 |
|
|
8″x14″ RED OAK FLUSH MOUNT AIR RETURN WOOD FLOOR VENTS $26.99 |
|
|
4 x 10 White Oak Flush Wood Floor Vent Register Unfin. $12.99 |
|
|
4 x 12 White Oak Flush Wood Floor Vent Register Unfin. $12.99 |
|
|
4 x 14 White Oak Flush Wood Floor Vent Register Unfin. $14.99 |
|
|
2 1/4 x 10 White Oak Flush Wood Floor Vent Unf. $12.99 |
|
|
2 1/4 x 12 White Oak Flush Wood Floor Vent Unf. $12.99 |
|
|
2 1/4 x 14 White Oak Flush Wood Floor Vent Unf. $14.99 |
|
|
Oak Wood, Flush Floor Vent,Vents,eggcrate, Grate grille $29.95 |
|
|
Oak Wood Air Return Vent, Floor or Wall Grate Grille $49.95 |
|
|
OAK WOOD FLOOR VENT WITH DAMPERS 4 X12 UNFINISH $9.95 |
|
|
8″x12″ WHITE OAK DROP IN AIR RETURN WOOD FLOOR VENTS $23.99 |
|
|
2″x12″ RED BIRCH FLUSH MOUNT WOOD FLOOR VENTS REGISTER $17.99 |
|
|
2×12 NV BAMBOO FLUSH MOUNT WOOD FLOOR VENT UNFINISHED $25.99 |
|
|
Wood floor registers vents NEW one price all 15 Red Oak $45.00 |
|
|
Tiger Wood Zebra Wood Hot Air Floor Vents 4×10″ $25.00 |
|
|
4 x 12 Red Oak Flush Wood Floor Vent Register Unfin. $12.99 |
|
|
4 x 12 Maple Flush Wood Floor Vent w/Frame Unfinished $16.99 |
|
|
4 x 14 Maple Flush Wood Floor Vent w/Frame Unfinished $18.99 |
|
|
2 1/4 x 10 Maple Flush Wood Floor Vent w/Frame Unf. $16.99 |
|
|
2 1/4 x 12 Maple Flush Wood Floor Vent w/Frame Unf. $16.99 |
|
|
2 1/4 x 14 Maple Flush Wood Floor Vent w/Frame Unf. $18.99 |
|
|
3 cherry wood floor vents, unfinished flush mount vent $20.00 |
|
|
2×12 RED OAK FLUSH MOUNT WOOD FLOOR VENT UNFINISHED $17.99 |
|
|
4 x 10 Walnut Flush Wood Floor Vent w/Frame Unfinished $16.99 |
|
|
4 x 14 Walnut Flush Wood Floor Vent w/Frame Unfinished $18.99 |
|
|
2 1/4 x 10 Walnut Flush Wood Floor Vent Unfinished $16.99 |
|
|
2 1/4 x 12 Walnut Flush Wood Floor Vent Unfinished $16.99 |
|
|
2 1/4 x 14 Walnut Flush Wood Floor Vent Unfinished $18.99 |
|
|
NEW – 4 x 10 DECOR GRATES Wood Floor Vents Registers 2 $23.99 |
|
|
HARD WOOD FLOOR VENT, GRILLE FLUSH W FRAME 4X10 CLASSIC $23.70 |
|
|
HARD WOOD FLOOR VENT, GRILLE FLUSH W FRAME 4×12 CLASSIC $24.90 |
|
|
HARD WOOD FLOOR VENT, GRILLE SELF RIM 4×10 BY CLASSIC $19.80 |
|
|
HARD WOOD FLOOR VENT, GRILLE SELF RIM 4×12 BY CLASSIC $21.00 |
|
|
4 x 12 Hickory Flush Wood Floor Vent w/Frame Unfinished $16.99 |
|
|
4 x 14 Hickory Flush Wood Floor Vent w/Frame Unfinished $18.99 |
|
|
2 1/4 x 10 Hickory Flush Wood Floor Vent Unfinished $16.99 |
|
|
2 1/4 x 12 Hickory Flush Wood Floor Vent Unfinished $16.99 |
|
|
2 1/4 x 14 Hickory Flush Wood Floor Vent Unfinished $18.99 |
|
|
8″x14″ WHITE OAK SELF RIM AIR RETURN WOOD FLOOR VENTS $24.99 |
|
|
8″x14″ RED OAK FLUSH MOUNT AIR RETURN WOOD FLOOR VENTS $26.99 |
|
|
4″x12″ RED BIRCH FLUSH MOUNT WOOD FLOOR VENT REGISTERS $20.99 |
|
|
4 x10 Brazilian Cherry Drop In Wood Floor Vent Register $21.99 |
|
|
4 x12 Brazilian Cherry Drop In Wood Floor Vent Register $21.99 |
|
|
4 x14 Brazilian Cherry Drop In Wood Floor Vent Register $23.99 |
|
|
2 x10 Brazilian Cherry Drop In Wood Floor Vent Register $21.99 |
|
|
2 x12 Brazilian Cherry Drop In Wood Floor Vent Register $21.99 |
|
|
2 x14 Brazilian Cherry Drop In Wood Floor Vent Register $23.99 |
|
|
4 x10 Australian Cypress Drop In Wood Floor Vent $21.99 |
|
|
4 x12 Australian Cypress Drop In Wood Floor Vent $21.99 |
|
|
4 x14 Australian Cypress Drop In Wood Floor Vent $25.99 |
|
|
2 x12 Australian Cypress Drop In Wood Floor Vent $21.99 |
|
|
2 x14 Australian Cypress Drop In Wood Floor Vent $25.99 |
|
|
4 x10 Brazilian Teak / Cumaru Drop In Wood Floor Vent $23.99 |
|
|
4 x12 Brazilian Teak / Cumaru Drop In Wood Floor Vent $23.99 |
|
|
4 x14 Brazilian Teak / Cumaru Drop In Wood Floor Vent $26.99 |
|
|
2 x10 Brazilian Teak / Cumaru Drop In Wood Floor Vent $23.99 |
|
|
2 x12 Brazilian Teak / Cumaru Drop In Wood Floor Vent $23.99 |
|
|
2 x14 Brazilian Teak / Cumaru Drop In Wood Floor Vent $26.99 |
|
|
4 x10 Brazilian Walnut / Ipe Drop In Wood Floor Vent $23.99 |
|
|
4 x12 Brazilian Walnut / Ipe Drop In Wood Floor Vent $23.99 |
|
|
4 x14 Brazilian Walnut / Ipe Drop In Wood Floor Vent $26.99 |
|
|
2 x10 Brazilian Walnut / Ipe Drop In Wood Floor Vent $23.99 |
|
|
2 x12 Brazilian Walnut / Ipe Drop In Wood Floor Vent $23.99 |
|
|
Blomus 65330 Vidro Small Vent-free Floor Fireplace $890.00 The new blomus indoor fireplaces are a breakthrough in indoor ambience. Now you can easily create a relaxing athmosphere in your living room. blomus have designed a genuine problem-solver for an indoor environment that would love a fireplace but lacks a chimney or gas line. All blomus fireplaces have been tested and approved by TÜV/UL for sufficient fire protection and operational safety such as… |
|
|
Floor Grate (Black) (4 x 10) $29.99 Introduce a touch of elegance with a brass or nickel floor grate. Created in VIctorian sytle, it will add an attractive accent to a variety of rooms. Built durable, the floor grates are sealed with a lacquer finish for maximum protection. There’s no need for cleaning or rubbing of any kind to maintain a shiny, lustrous finish. What’s more, fully adjustable dampers provide complete air-flow control… |
|
|
Floor Grate (Solid Brass) (4 x 10) $29.99 Introduce a touch of elegance with a brass or nickel floor grate. Created in VIctorian sytle, it will add an attractive accent to a variety of rooms. Built durable, the floor grates are sealed with a lacquer finish for maximum protection. There’s no need for cleaning or rubbing of any kind to maintain a shiny, lustrous finish. What’s more, fully adjustable dampers provide complete air-flow control… |
|
|
Decor Grates 4 x 8 Natural Oak Wood Floor Register $15.97 Louvered Design – High quality kiln-dried solid oak. Pre-finished top protected with wood sealer. Easy air control with rust proof adjustable damper box. 4″ x 8″ rough opening…. |
|
|
Decorative Wood Air Conditioning or Heating Grille Cover Overall Grille Size shown is 7-3/4″ x 5-3/4″. 1/4″ thick laser cut. We can cut any size or shape grille…. |
|
|
Decor Grates 4 x 10 Natural Oak Wood Floor Register $15.25 Inside rough opening dimensions: 4″ width x 10″ length. Outside dimensions: 5 1/2″ width x 11 1/2″ length…. |
|
|
Diffuse flow from hydrothermal vents (WHOI-91-23) … |